![intel dh61cr bios update issues intel dh61cr bios update issues](https://docplayer.net/docs-images/46/21285645/images/page_13.jpg)
I've also tried bridging the 2nd and 3rd pins on the BIOS Config jumper and I just get a BIOS maintenance window.
![intel dh61cr bios update issues intel dh61cr bios update issues](https://1.bp.blogspot.com/-qF-2--Nu0W4/Xxk7U4CEmwI/AAAAAAAAEsI/swk2JNsrSNwkyinXjmXr33ogx96-kRznwCLcBGAsYHQ/s1600/GP%2B%282%29.jpg)
I've tried putting the jumper back and using F7 to flash as well and it just freezes up when I press enter on the prompt to confirm the flash. It will flash for about 15-20 seconds, then it will stop, then repeat with the flashing intervals, while the monitor is still off. Downgrading the BIOS to an earlier version is not recommended and may not be supported. We do not recommend BIOS updates for computers that do not need it. The only sign of life is the activity light on the flash drive. Update the BIOS on your computer only if the newer BIOS version specifically solves a problem you have. They are very slow until we update them to BIOS version 120. Following normal protocol I will pull the battery and jumper out, then plug the computer back in after 30 seconds, then power it on, these few computers won't even wake the monitor. DH61CR Bricked After 99 BIOS Update In the organization I work for we have quite a handful of Nexlink PCs that have the Intel DH61CR, on Core i3-2100 CPUs. On a few of the computers, the 99 update will render them completely useless. This process works on the vast majority of computers we've done it on. Since they ship with version 23 the process is to iFlash or Express update them to 48, then to 99, and after that we have to use the recovery mode (pulling the BIOS Config jumper and battery, with the BE0120.BIO on a flash drive and then normally it will flash to 120. In the organization I work for we have quite a handful of Nexlink PCs that have the Intel DH61CR, on Core i3-2100 CPUs.